Importaint restrictions on the use of the product
The terms Warning, Caution and Note may be used in this document in the following context:
Information given with the DANGER icon must be considered to avoid serious injury.
Information given with the WARNING icon must be considered to avoid damage to equipment and possible injury.
Information given_ with the INFO icon is highlighted to assist with a process or action. It may emphasise or add to other text in the document
The content of this document is not meant to override or substitute any applicable Statutory, Regulatory, Customer/Site, etc. Health Safety & Environment (HS&E) requirements.
All works should only be performed by trained, qualified and competent personnel who are aware of the hazards associated with the constituent components of this installation in addition to the system as a whole. Failure to comply with these practices may result in death, serious bodily injury, loss of equipment and environmental damage.
A risk assessment (JHA) should be conducted PRIOR to the start of any works or actions within this document. Whilst every effort has been made to ensure the execution of this document represents no HS&E hazard, Banlaw takes neither responsibility nor liability for the consequences and damages that may occur in the execution of works within this document.
Persons conducting or otherwise involved with the execution of the works within this document and project have an obligation to ensure that all HS&E requirements are known and understood and subsequently followed at all times.
- The safe installation and subsequent operation of a Banlaw product relies on the completion of all necessary “due diligences” for the assessment of the Banlaw product(s) being suitable for the intended application(s). Such an assessment is best achieved through the mutual cooperation of the supplier/OEM (Banlaw) and the customer or end-user. Once such an assessment deems the Banlaw product(s) to be suitable, the customer or end-user shall ensure effective “change management” applies should any prominent or influential aspect of the application (upon which the initial assessment was based) be subject to change and may affect the ongoing suitability (i.e. safety and proper function) of the Banlaw products.
- The Banlaw ResTrack LiteTM Controller incorporate components manufactured from aluminium. Products containing external (exposed) aluminium are typically unsuitable for use within an underground coal mine, or otherwise within an area where the use of external aluminium components (or other materials within the product) are prohibited for use in such areas in accordance with applicable governances.